刨花板工艺技术与其进步——刨花分选

从刨花板生产的刨花筛选与风选相关技术、工艺设计及生产过程工艺控制等方面,阐述了适应刨花分选工艺技术的相关影响因素与技术改进方案。     

抗FGF-2纳米抗体抑制碱烧伤诱导大鼠角膜血管新生

目的：研究抗成纤维细胞生长因子（FGF-2）纳米抗体对碱烧伤诱导的大鼠角膜血管生成的治疗作用。方法：将SD大鼠分为：假手术组（Sham），模型组（Model，直径为3 mm的浸有1 mol/L NaOH溶液圆形滤纸贴于大鼠眼角膜中央处30 s，制备大鼠碱烧伤血管生成模型）和治疗组（Treatment，术后7天至21天用3 mg/mL的抗FGF-2纳米抗体溶液滴眼，每日3次，每次10 μL，共14天）。通过体视显微镜和CD31免疫组织化学染色计算大鼠角膜血管生成情况。实时荧光定量PCR、酶联免疫吸附测定和免疫组织化学染色3种方法检测抗血管内皮生长因子（VEGF）和FGF-2的mRNA和蛋白表达水平。结果：（1）血管：治疗组较模型组的面积显著减少，血管管腔较窄（P<0.05），在药物干预14天后，差异最为显著；（2）FGF-2的mRNA和蛋白表达水平：模型组与治疗组的结果相近（P>0.05）；（3）VEGF的mRNA和蛋白表达水平：治疗组显著高于模型组（P<0.05）。此外，假手术组的持续给药也使得VEGF表达显著增加（P<0.05）。 结论：抗FGF-2纳米抗体可抑制由碱烧伤诱导的角膜血管新生，但也使得正常大鼠角膜或病理大鼠角膜的VEGF表达水平代偿性升高。     

车辆自组织网络中新型NP-CSMA随机多址协议研究分析

智能交通的出现使得车辆自组织网络受到越来越多的关注。车辆自组织网络的动态拓扑结构变化非常剧烈,这对网络的吞吐率、传输速率等性能提出了很高的要求。提出1种具有握手机制协议的自适应多通道双时钟NP-CSMA随机多址接入协议。该协议首先区分2种P-CSMA协议,握手机制成功解决了隐藏的终端问题,双时钟机制减少了平均空闲时间,多通道机制增加通道数量和划分用户优先级的同时提高了系统吞吐率,自适应机制能够使系统在高负载下保持稳定吞吐率。还对该协议的传输速率进行了分析,得出该协议的传输速率相对较高的结论。通过平均周期方法推导吞吐率和传输速率的计算公式,仿真结果与理论推导一致。     

Spray drying of a phenolic‐rich membrane filtration fraction of olive mill wastewater: optimisation and dried product quality

Olive mill wastewater (OMWW) from 3‐ and 2‐phase mills was subjected to a two‐step membrane filtration process. The obtained reverse osmosis retentate (RO‐R) is a phenolic‐rich coproduct stream, and the reverse osmosis permeate is a near‐pure water stream. A pilot‐scale spray dryer was used for the production of RO‐R powder. The optimum temperature/feed pump conditions were obtained for 3‐phase (150°C/4.4 Hz) and for 2‐phase RO‐R (175°C/3.8 Hz). The powders obtained by spray drying under these conditions were analysed for physicochemical properties, including identification and quantification of phenolic compounds. Protocatechuic acid, 3‐hydroxytyrosol, tyrosol, vanillic acid and p‐coumaric acid were quantified in both RO‐R powders, which show the possibility to obtain a phenolic‐rich powder from an OMWW filtration fraction. This will lead towards better usage of by‐products from olive oil production.     

Water Oxidation Catalysts for Artificial Photosynthesis

Water oxidation is the primary reaction of both natural and artificial photosynthesis. Developing active and robust water oxidation catalysts (WOCs) is the key to constructing efficient artificial photosynthesis systems, but it is still facing enormous challenges in both fundamental and applied aspects. Here, the recent developments in molecular catalysts and heterogeneous nanoparticle catalysts are reviewed with special emphasis on biomimetic catalysts and the integration of WOCs into artificial photosystems. The highly efficient artificial photosynthesis depends largely on active WOCs integrated into light harvesting materials via rational interface engineering based on in‐depth understanding of charge dynamics and the reaction mechanism.     

Photoactive Earth‐Abundant Iron Pyrite Catalysts for Electrocatalytic Nitrogen Reduction Reaction

The generation of ammonia, hydrogen production, and nitrogen purification are considered as energy intensive processes accompanied with large amounts of CO₂ emission. An electrochemical method assisted by photoenergy is widely utilized for the chemical energy conversion. In this work, earth‐abundant iron pyrite (FeS₂) nanocrystals grown on carbon fiber paper (FeS₂/CFP) are found to be an electrochemical and photoactive catalyst for nitrogen reduction reaction under ambient temperature and pressure. The electrochemical results reveal that FeS₂/CFP achieves a high Faradaic efficiency (FE) of ≈14.14% and NH₃ yield rate of ≈0.096 µg min^?1 at ?0.6 V versus RHE electrode in 0.25 m LiClO₄. During the electrochemical catalytic reaction, the crystal structure of FeS₂/CFP remains in the cubic pyrite phase, as analyzed by in situ X‐ray diffraction measurements. With near‐infrared laser irradiation (808 nm), the NH₃ yield rate of the FeS₂/CFP catalyst can be slightly improved to 0.1 µg min^?1 with high FE of 14.57%. Furthermore, density functional theory calculations demonstrate that the N₂ molecule has strong chemical adsorption energy on the iron atom of FeS₂. Overall, iron pyrite‐based materials have proven to be a potential electrocatalyst with photoactive behavior for ammonia production in practical applications.     

吹氩流量对结晶器流场影响的插钉工业试验

 结晶器吹氩流量对流场分布有明显影响，因此明确吹氩流量对结晶器内流场分布的影响规律对提高铸坯质量有重要意义。通过插钉法工业试验研究了吹氩流量对结晶器内流场分布的影响，并且定量分析了液位波动的变化。结果表明，随着吹氩流量的增大，流场形态从双环流逐步转变为复杂流和单环流。结晶器内流场形态从双环流转变为复杂流和单环流的过程中，水口附近速度逐渐增大，液位逐渐升高，弯月面速度分布逐渐转变为从水口流向窄面，液位波动也相应增大。因此，生产过程中应选择合适的吹氩流量，避免产生复杂流和单环流，以提高铸坯质量。     

微波消融治疗结直肠癌根治术后肝转移患者的疗效分析

【摘要】 目的 评价微波消融（MWA）在结直肠癌根治术后肝转移治疗中的作用,评估局部疗效及各因素对远期预后的影响。方法 回顾性统计2010年1月至2011年12月接受超声引导下MWA术治疗的106例结直肠癌根治术后肝转移患者的临床资料。观察术后完全消融率、并发症和局部肿瘤进展,计算术后总体生存率和无瘤生存率,并行生存率相关影响因素分析。 结果 106例患者共消融215枚肿瘤,首次消融后209枚达到完全消融（97.2%）；严重并发症发生率2.8%(3/106)。截至随访结束,局部肿瘤进展率6.6% (7/106)；术后中位生存时间35个月；1、3、5 年总体生存率和无瘤生存率分别为87.7%、50.0%、33.0%和55.7%、21.7%、5.7%。亚组分析显示,肿瘤最大直径≤3 cm的患者5年生存率为35.1%,>3 cm的患者5年总生存率为27.3%,差异无统计学意义 ( P =0.077),化疗组5年生存率为38.9%,显著高于未化疗组的10.0%( P =0.003),肝内单发转移瘤患者5年生存率为50.9%，显著高于多发转移瘤患者的16.8% ( P =0.000)。 结论 MWA在直径≤6 cm肝转移瘤的治疗中,即使肿瘤直径较大,在完全消融后也能得到与直径较小的肿瘤相似的局部疗效和远期预后；MWA联合化疗能提高结直肠癌肝转移患者的远期预后,效果优于仅接受MWA；是否接受化疗、肝转移瘤数量及原发病灶手术切除时的Dukes分期是生存率的独立危险因素。